How to use your N2O Rapid Infuser
- Clover DMMC WIX
- Sep 5, 2025
- 2 min read
For a comprehensive step by step guide see below
Follow our step-by-step guide on how to use your Premium GoldWhip N2O cylinder and Rapid Infuser.
You Will Need
GoldWhip 615g Tank
GoldWhip Rapid Infuser
Your ingredients
Important warning
Before using this product, please read the full manual carefully and ensure you understand all instructions and safety precautions.
How to use your infuser
1. Remove the rear cover
Grasp the cover and press the release button to remove the back cover.
2. Install the cylinder
Place the machine upside down on a flat surface, and align the cylinder’s screw thread with the matching thread on the machine. Turn the cylinder to securely fasten it to the machine. Ensure the threads are aligned properly and do not cross.
3. Install the rear cover
Grasp the middle part of the back cover, align the clip of the back cover with the machine card, and gently push it toward the machine until the back cover fits.
4. Install the water bottle
Pour water into the water bottle up to the highest water line, then turn it to the right to screw the water bottle into the machine.
5. Inflation operation
Press down for 1 second each time. Press the gas injection button 2–3 times repeatedly.
6. Exhaust operation
Press down on the exhaust button of the machine to release the residual gas.
⚠ Warning: If the button is not pressed to release the residual gas, the water bottle cannot be removed normally.
7. Remove the water bottle
After the pressure release is completed and the bubbles rise in the water bottle, rotate the water bottle to the left to remove it.
Important: Only remove the gas cylinder once the bottle has been taken out.